Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Español |Deutsch |Pусский |
| No.12965486
- Product Categories
- Friendly Links
Information Name: | Wucheng Minerals Minerals heating unit _ _ YueFeng heating unit heat exchanger |
Published: | 2014-12-11 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Texas Yuefeng Heat Exchanger Manufacturing Co. (www.yfhrq.com) located in Texas Dezhou Xinhua Industrial Park west of State Road 105, Shandong, Contact: Zhang thermal oil heat exchanger applications is very extensive, in petroleum, chemical Applications mining machine industry heating unit, and then of course in addition to a lot of applications are also very common. In their respective industries role is different. For example: petroleum and chemical industry main role is to: polymerization, condensation, distillation, melting, dehydration, forced insulation; Oil Industry: fatty acid distillation, oil decomposition, concentrated, and esterification reactor temperature vacuum deodorization Jinan mining machine heating unit, The reactor was heated. HTF heat synthetic fiber industry: polymerization, melt spinning, extension, dry; textile work: heat setting roller heating, drying room heating, heat capacity staining; Nonwovens Industry: Non-woven; Feed Industry: bake dry; plastics and rubber industry: pressing, rolling, extrusion, vulcanization molding. Paper Industry: dry, corrugated paper processing. Wood industry: more plywood, fiberboard compression molding, laminate heating Qu mining machine heating units, hot plate heating, hydraulic machine temperature, wood drying. HTF oil furnace heat exchanger should ensure that the exit of the HTF temperature must not exceed the maximum operating temperature, thermal oil furnace temperature should be less than the maximum film temperature allows the film, the film temperature and body temperature should always HTF mainstream there is a temperature difference. To prevent the membrane temperature is too high, to avoid thermal oil decomposition, polymerization, coking and aging, the main measures are: (1) at the start of the ignition temperature, due to low oil temperature, viscosity, thick film, must be strictly controlled heating rate should normally be at 40-50 ℃ / h or less, the flame should be uniform to avoid local heat load is concentrated; (2) the thermal load should be reduced or temporarily disable open bypass oil return valve, regulating the system flow wucheng mining machine heating unit, HTF so hot oil furnace tube with sufficient volume and flow; (3) under no circumstances do not allow overloaded?. When (4) normal shutdown, the circulation pump to continue operating for some time, open the bypass to allow thermal oil continues to flow, stop the air, the wind, until the oil temperature dropped to below 100 ℃, circulation pump stopped before . (5) Heat Transfer Fluid heaters regularly cleaning. (6) regular inspection, testing, maintenance, heat oil furnace monitoring instruments, it is sensitive, accurate, and reliable. |
Admin>>>
You are the 50573 visitor
Copyright © GuangDong ICP No. 10089450, Texas Yuefeng Heat Exchanger Manufacturing Co. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 50573 visitor
Copyright © GuangDong ICP No. 10089450, Texas Yuefeng Heat Exchanger Manufacturing Co. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility